48V-DC-charger-PC-connector-f-gel-SLA-battery-f-electric-scooter-goKart-ebike

Description

48V 2.5 amp PC STYLE PORT PLUG With "Intelligent" Technology
This charger has a built in fan on the side with venting...SLA battery charger,,Sealed Lead Acid..
With the "Intelligent constant current,constant voltage,trickle charge" Technology this charger will safely charge your batteries at the fastest,safest rate that the charger sees fit without overcharging and causing damage,which saves the cycle-life of your batteries..These are very nice chargers and sell out fast,We have a limited supply so get them while you can its truly a very nice charger and the price is also nice!
This is a Fast Scooters 48 volt charger used for many E Bikes and scooters..Not for lipo/lithium style batteries. For use with standard AGM SLA batteries..
These will work with any 48 volt SLA unit with the pc style port charger as pictured above.
These are a much better charger than others available hands down..
Always check your scooters polarity,this charger is marked and comes with directions on how to check polarity..
Its charges fast with a built in fan and is a really nice upgrade to any stock charger you may have.
These are all tested and the output marked on the back of the charger which everyone puts out over 55 Volts!
They are not noisey like others as the fan runs very smooth..It charges at a safe rate of 2.5-3.0 amps.So your not going to effect your run time.
Limited amount available in this style,,this is the exact style I use and its been over 5 years.
Always check your scooters power polarity/positive and negative..This has a quick access panel on the back to quickly swap the polarity without taking apart the whole charger..